What requirements should the design of calcium hydroxide production line meet?

/in /by

It should be known that in order to improve the product performance and work efficiency of the calcium hydroxide production line, the calcium hydroxide production line manufacturers will continue to develop and innovate equipment, so as to strive to develop a production line that can better meet the needs of users. But no matter how the growth line is designed and developed, the following requirements are inseparable.

1. Environmental protection requirements

When designing the calcium hydroxide production line, it is necessary to use decomposable, non-toxic and pollution-free materials that meet environmental protection requirements, use environmentally friendly renewable materials as much as possible, avoid the use of harmful materials containing resin, asbestos, and chlorinated rubber, while ensuring In the case of equipment performance, the use of additional materials should be reduced, and the design should be concise to reduce the waste of energy and reduce the weight of the equipment.

2. Humanized requirements

Since the users of environmental protection equipment are front-line workers, the design process of the calcium hydroxide production line should be people-oriented, and the control room should be equipped with sound insulation, shock absorption, and thermal insulation materials to ensure the sealing performance and environmental protection performance of the control room. Use fluorine-free air conditioners, set each control lever to a reasonable position, and fully consider the purpose of humanization.

3. Intelligent requirements

In the design of the calcium hydroxide production line, it is necessary to fully consider the requirements of automation, design a fully automatic control device to avoid distracting the attention of the operators, and set up a fully automatic electronic monitoring and fault diagnosis system to reduce the repeated operation of the staff. Quickly detect the faulty parts of each other and take appropriate wrong measures.

Therefore, when manufacturers design and develop calcium hydroxide production lines, they will design around these three points, so that they can design and develop equipment that meets the needs of users. Otherwise, the design and development will only waste more time.