Compared with the traditional calcium hydroxide production process, what are the advantages of the calcium hydroxide production line?

The traditional production process of calcium hydroxide is mainly based on manual production, but there are many disadvantages. With the development of society, the scale of mechanized production has gradually expanded, replacing manual production, and it has been widely used. Today, the editor of Zhongcai is here. Let me introduce to you the advantages of calcium hydroxide production line compared with traditional calcium hydroxide production process!

Disadvantages of traditional calcium hydroxide production process

15T installation site of Weinan Yaobai Cement Plant

1. Pollution of the environment

Because it is produced by hand, a large amount of high-temperature steam and dust generated during the digestion process will permeate everywhere, and the pollution radius can reach more than 1,000 meters, causing serious damage to the forests and crops within the polluted area.

2. Affect health

Manual production is labor-intensive, the production environment is poor, and the pollution of dust and steam will affect the physical and mental health of production workers.

3. Low production efficiency

The efficiency of manual production is very low. On average, each person does not exceed 1 ton of finished calcium hydroxide during the day. The production scale is small, the average annual output is only a few hundred tons, and the larger scale is only about 5,000 tons. The demand of pharmaceutical food, petroleum, papermaking and other industries.

4. Unstable quality

Manual production is all judged by the experience of the staff. Everyone’s experience is different, so the quality of the finished products is uneven, sometimes good and sometimes bad, which cannot meet the requirements of the petrochemical industry and the fine chemical industry.

Advantages of calcium hydroxide production line

1. Easy to operate

The calcium hydroxide production line has a high degree of mechanization and can be operated only through simple training, with simple operation and low labor intensity.

2. Protect the environment

The mechanical operation reduces the amount of flue gas emissions, and the production line is equipped with dust removal equipment, which reduces environmental pollution and prevents workers’ health from being affected.

3. High production efficiency

The production line has various specifications. The output of small-sized equipment in one hour can exceed the output of labor in one day, and different specifications can be selected according to different output requirements, and the production efficiency is very high.

4. Good quality

The whole production line is controlled by computer, the discharge temperature is controlled at about 45 degrees Celsius, and the water content of the discharge is controlled at about 1%. In this way, the agglomeration of finished products is prevented, and all products are standardized, which meet the needs of users in various industries.

The above is the answer to the question of what are the advantages of the calcium hydroxide production line. After the above introduction, it can be seen that the traditional calcium hydroxide production process will pollute the environment, affect health, low production efficiency and unstable quality. In contrast, calcium hydroxide The production line has the advantages of convenient operation, environmental protection, high production efficiency and good quality.